Seismic and vibration tests for assessing the effectiveness of GFRP for retrofitting masonry structures

Paul Michelis, Costas Papadimitriou, Grigorios Karaiskos, Dimitra-Christina Papadioti, Clemente Fuggini

Research output: Contribution to journalArticle

5 Citations (Scopus)


Full-scale shake table seismic experiments and low-amplitude vibration tests on a masonry
building are carried out to assess its seismic performance as well as study the effectiveness of a new
multifunctional textile material for retrofitting masonry structures against earthquakes. The un-reinforced and the retrofitted with glass fiber reinforced polymer (GFRP) strips masonry building was subjected to a series of earthquake excitations of increasing magnitude in order to progressively induce various small, moderate and severe levels of damage to the masonry walls. The performance of the original and retrofitted building states is evaluated. Changes in the dynamic characteristics (lowest four modal frequencies and damping ratios) of the building are used to assess and quantify the damage states of the masonry walls. For this, the dynamic modal characteristics of the structure states after each earthquake event were estimated by performing low-amplitude impulse hammer and sine-sweep forced vibration tests. Comparisons between the modal results calculated using traditional accelerometers and those using Fiber Bragg Grating (FBG) sensors embedded in the reinforcing textile were carried on to investigate the reliability and accuracy of FBG sensors in tracking the dynamic behaviour of the building. The retrofitting actions restored the stiffness characteristics of the reinforced masonry structure to the levels of the original undamaged un-reinforced structure. The results show that despite a similar dynamic behavior identified, corresponding to reduction of the modal frequencies, the unreinforced masonry building was severely damaged, while the reinforced masonry building was able to withstand, without visual damage, the induced strong seismic excitations. The applied GFRP reinforcement architecture for one storey buildings was experimentally proven reliable for the most severe earthquake accelerations. It was easily placed in a short time and it is a cost effective solution (covering only 20% of the external wall surfaces) when compared to the cost for full wall coverage by GFRPs.
Original languageEnglish
Pages (from-to)207-230
JournalSmart Structures and Systems
Issue number3
Publication statusPublished - 10 Feb 2012


  • masonry structures
  • glass fiber reinforced polymers
  • shake table tests
  • structural identification
  • health monitoring
  • damage assessment

Fingerprint Dive into the research topics of 'Seismic and vibration tests for assessing the effectiveness of GFRP for retrofitting masonry structures'. Together they form a unique fingerprint.

Cite this