Onderzoeksoutput

Onderzoeksoutput per jaar 2016 2018 2020 2022 2023 2024 2025

• 35 Conference paper
• 14 Article
• 1 PhD Thesis

Onderzoeksoutput per jaar

Onderzoeksoutput per jaar

Zoekresultaten

• 2025

  Combined computational-experimental investigation of residual stresses and pre-cracking in mode I behaviour of thick adhesively bonded GFRP composite joints

  Sharma, A., Shivaie Kojouri, A., Fan, J., Vassilopoulos, A. P., Michaud, V., Kalteremidou, K-A., Van Hemelrijck, D. & Van Paepegem, W., 1 jan. 2025, In: Composite Structures. 351, blz. 1-17 17 blz., 118549.

  Onderzoeksoutput: Article › peer review
  1 Citaat (Scopus)

• Effect of process-induced defects on the mechanical properties of SLM-Scalmalloy®

  Chabot, A., Mungiovi, A., Servais, P., Koch, D., Kalteremidou, K-A., Pyl, L. & Godet, S., 2025, Leuven Additive Manufacturing Conference. KU Leuven, blz. 1-1 1 blz.

  Onderzoeksoutput: Conference paper

• Investigation of the Sensitivity of Acoustic Emission to the Differentiation Between Mode I, II, and III Fracture in Bulk Polymer Materials

  Shivaie Kojouri, A., Angelis, D., Karami, J., Sharma, A., Van Paepegem, W., Van Hemelrijck, D. & Kalteremidou, K-A., 6 jan. 2025, In: Polymers (Basel). 17, 1, blz. 1-21 21 blz., 125.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand
  2 Citaten (Scopus)

  11 Downloads (Pure)

• Temperature and rate dependent shear characterization and modeling of spread-tow woven Flax/PP composite laminates

  Hossein Abadi, R., Kalteremidou, K-A., Karami, J. & Van Hemelrijck, D., 15 jan. 2025, In: Composites Part B: Engineering. 289, blz. 1-14 14 blz., 111930.

  Onderzoeksoutput: Article › peer review
• 2024

  Acoustic emission for differentiation between cross-ply composite laminates and identification of dominant stress states

  Kalteremidou, K-A., Angelis, D., Pyl, L. & Van Hemelrijck, D., 2024, Proceedings of the 21st European Conference on Composite Materials. European Society of Composite Materials, blz. 205-209 5 blz.

  Onderzoeksoutput: Conference paper

• Acoustic emission in polymer composites: early damage detection for prediction of the structural performance

  Kalteremidou, K-A. & Van Hemelrijck, D., 7 okt. 2024, 11th International Conference on Structural Analysis of Advanced Materials (ICSAAM11). AmaDema Advanced Materials Design & Manufacturing LTD, blz. 1-2 2 blz.

  Onderzoeksoutput: Conference paper

• An experimental and analytical study of mode I fracture and crack kinking in thick adhesive joints

  Shivaie Kojouri, A., Karami, J., Kalteremidou, K-A., Fan, J., Sharma, A., Vassilopoulos, A., Michaud, V., Van Paepegem, W. & Van Hemelrijck, D., sep. 2024, In: Composites Part B: Engineering. 284, blz. 1-16 16 blz., 111695.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand
  3 Citaten (Scopus)

  19 Downloads (Pure)

• An experimental study on mode II delamination in a unidirectional thermoplastic composite using acoustic emission

  Karami, J., Kalteremidou, K-A., Angelis, D. & Van Hemelrijck, D., 2024, Proceedings of the 21st European Conference on Composite Materials. European Society of Composite Materials, blz. 118-124 7 blz.

  Onderzoeksoutput: Conference paper

• Differentiation between cross-ply thermoplastic composite laminates based on acoustic emission signals

  Kalteremidou, K-A. & Van Hemelrijck, D., 2024, 43rd Solid Mechanics Conference. Institute of Fundamental Technological Research, Polish Academy of Sciences, blz. 106-106 1 blz.

  Onderzoeksoutput: Conference paper

• Experimental evaluation of the T-stress impact on the crack trajectory in thick adhesive joints under mode I loading

  Shivaie Kojouri, A., Karami, J., Kalteremidou, K-A., Fan, J., Sharma, A., Vassilopoulos, A., Michaud, V., Van Paepegem, W. & Van Hemelrijck, D., 2024, Proceedings of the 21st European Conference on Composite Materials. European Society of Composite Materials, blz. 1627-1634 8 blz.

  Onderzoeksoutput: Conference paper

• In-plane shear investigation of thermoplastic composites at high temperatures using bias extension test

  Hossein Abadi, R., Kalteremidou, K-A. & Van Hemelrijck, D., 17 mei 2024, Spring School for Young Researchers, New Trends in Experimental Mechanics - NTEM 1, 13 – 17 May 2024, Zakopane, Poland. EuraSEM, blz. 40-40 1 blz.

  Onderzoeksoutput: Conference paper

  Open Access

• Investigating the mode-I failure behavior of thick adhesive joints using a coupled computational/experimental approach

  Sharma, A., Shivaie Kojouri, A., Fan, J., Vassilopoulos, A., Michaud, V., Kalteremidou, K-A., Van Hemelrijck, D. & Van Paepegem, W., 2024, Proceedings of the 21st European Conference on Composite Materials. European Society of Composite Materials, blz. 928-935 8 blz.

  Onderzoeksoutput: Conference paper

• Investigation of Mode-I Failure Behaviour in Thick Adhesive Joints of Wind Turbine Blades: A Novel Finite Element Simulation Approach

  Sharma, A., Shivaie Kojouri, A., Fan, J., Vassilopoulos, A., Michaud, V., Kalteremidou, K-A., Van Hemelrijck, D. & Van Paepegem, W., 13 mei 2024, International Symposium on Current challenges of wind energy development: Materials science and structural aspects . National Technical University of Athens, blz. 1-1 1 blz.

  Onderzoeksoutput: Conference paper

• Numerical modeling of the in-plane shear behavior of woven thermoplastic composites at high temperature

  Hossein Abadi, R., Kalteremidou, K-A. & Van Hemelrijck, D., 2024, Proceedings of the 21st European Conference on Composite Materials. European Society of Composite Materials, blz. 1000-1004 5 blz.

  Onderzoeksoutput: Conference paper

  Open Access
• 2023

  AN ACOUSTIC EMISSION STUDY OF THE MOISTURE EFFECT ON THE TENSILE MECHANICAL PROPERTIES OF FLAX FIBER REINFORCED THERMOPLASTIC COMPOSITES

  Karami, J., Hossein Abadi, R., Angelis, D., Kalteremidou, K-A. & Van Hemelrijck, D., 5 jul. 2023, 20th International Conference on Experimental Mechanics (ICEM20). Porto, Portugal : EuraSEM, blz. 373-374 2 blz. 20390

  Onderzoeksoutput: Conference paper

  • acoustic emission 100%
  • moisture 99%
  • mechanical properties 62%
  • composite materials 56%
  • fibers 52%

• Are thermoplastic composites the future?

  Van Hemelrijck, D., Karami, J., Hossein Abadi, R., Shivaie Kojouri, A., Katalagarianakis, A., Zhu, Y., Charkieh, A. S., Pyl, L. & Kalteremidou, K-A., 13 sep. 2023, 10th International Conference on Structural Analysis of Advanced Materials. The University of Patras, blz. 1-1 1 blz.

  Onderzoeksoutput: Conference paper

  • Composite Material 100%
  • Cyanate Ester 32%
  • Polyimide Macromolecule 21%
  • Application 21%
  • Carbon Fiber 20%

• ASSESSING THE BOUNDARY CONDITIONS’ EFFECT ON THE THERMO-MECHANICAL MODELING OF A BIAS-EXTENSION TEST OF FLAX/PP COMPOSITE

  Hossein Abadi, R., Karami, J., Kalteremidou, K-A. & Van Hemelrijck, D., 4 jul. 2023, 20th International Conference on Experimental Mechanics (ICEM20). EuraSEM, blz. 265-266 2 blz.

  Onderzoeksoutput: Conference paper

  • boundary condition 100%
  • modeling 52%
  • test 48%
  • effect 29%
  • temperature 15%

• Combination of digital image correlation and acoustic emission for damage assessment of beam carbon/epoxy sub-components

  Kalteremidou, K-A., Murray, B. R., Payan, D., Van Hemelrijck, D. & Pyl, L., 5 jul. 2023, 20th International Conference on Experimental Mechanics (ICEM20). EuraSEM, blz. 339-340 2 blz.

  Onderzoeksoutput: Conference paper

  • Acoustic emissions 100%
  • Carbon 69%
  • Composite materials 53%
  • Nondestructive examination 48%
  • Composite structures 46%

• Experimental evaluation of J-integral in elastic and elastic–plastic polymers by means of digital image correlation and higher-order eigenfields under mode-I

  Shivaie Kojouri, A., Khosravi Rikaee, H., Kalteremidou, K-A. & Van Hemelrijck, D., 26 okt. 2023, In: Engineering Fracture Mechanics. 291, blz. 1-17 17 blz., 109534.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Correlation methods 100%
  • High density polyethylenes 98%
  • Displacement 68%
  • Polymers 60%
  • Finite element method 51%
  8 Citaten (Scopus)

  98 Downloads (Pure)

• EXPERIMENTAL STUDY ON MODE-I DELAMINATION OF THERMOPLASTIC COMPOSITES USING DIGITAL IMAGE CORRELATION AND ACOUSTIC EMISSION

  Karami, J., Kalteremidou, K-A., Angelis, D. & Van Hemelrijck, D., 2 aug. 2023, 23rd International Conference on Composite Materials (ICCM23). ICCM, blz. 1-9 9 blz. 1828

  Onderzoeksoutput: Conference paper

  • acoustic emission 100%
  • fracture strength 61%
  • composite materials 56%
  • cracks 47%
  • data reduction 37%

• INFLUENCE OF HEATING TIME DURING MOLTEN STATE TESTING OF FLAX/PP COMPOSITES USING THE BIAS EXTENSION TEST

  Hossein Abadi, R., Karami, J., Kalteremidou, K-A. & Van Hemelrijck, D., 1 aug. 2023, 23rd International Conference on Composite Materials (ICCM23). ICCM, blz. 1-9 9 blz.

  Onderzoeksoutput: Conference paper

  Open Access

  • heating 100%
  • test 54%
  • oven 25%
  • distribution 25%
  • calorimetry 24%

• NDT of composite components for automotive applications

  Kalteremidou, K-A., Pyl, L. & Van Hemelrijck, D., 13 sep. 2023, 10th International Conference on Structural Analysis of Advanced Materials. The University of Patras, blz. 1-2 2 blz.

  Onderzoeksoutput: Conference paper

  • Acoustic emissions 100%
  • Nondestructive examination 96%
  • Composite materials 53%
  • Fatigue of materials 41%
  • Structural health monitoring 32%

• Recent developments in acoustic emission for better performance of structural materials

  Ospitia, N., Korda, E., Kalteremidou, K-A., Lefever, G., Tsangouri, E. & Angelis, D., mrt. 2023, In: Developments in the built environment. 13, blz. 1-9 9 blz., 100106.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Acoustic Emission 100%
  • Acoustic emissions 72%
  • Strain 18%
  • Structural health monitoring 14%
  • Bearing capacity 13%
  23 Citaten (Scopus)

  91 Downloads (Pure)

• The impact of multiaxiality on the static and fatigue fracture of carbon/epoxy polymer composites

  Kalteremidou, K-A., Van Hemelrijck, D. & Pyl, L., 13 jun. 2023, 15th International Conference on Fracture (ICF15). Georgia Institute of Technology, blz. 0-2 2 blz.

  Onderzoeksoutput: Conference paper

  • laminates 100%
  • carbon 71%
  • composite materials 65%
  • polymers 62%
  • shear stress 48%
• 2022

  ACOUSTIC EMISSION FOR IDENTIFICATION OF THE DOMINANT STRESS COMPONENT IN POLYMER COMPOSITES AT EARLY LOADS,

  Kalteremidou, K-A., Angelis, D., Van Hemelrijck, D. & Pyl, L., 16 sep. 2022, 35th European and 10th International Conference on AE Testing. European Working Group on Acoustic Emission, blz. 1-9 9 blz.

  Onderzoeksoutput: Conference paper

  • acoustic emission 100%
  • laminates 65%
  • composite materials 56%
  • polymers 54%
  • carbon fibers 50%

• Combination of Digital Image Correlation and Acoustic Emission for Damage Assessment of V-Shape Carbon/Epoxy Sub-Components

  Kalteremidou, K-A., Murray, B., Carrella-Payan, D., Van Hemelrijck, D. & Pyl, L., 17 aug. 2022, 19th International Conference on Experimental Mechanics. 1 redactie MDPI AG, Vol. 4. blz. 1-8 8 blz. 24

  Onderzoeksoutput: Conference paper

  • Acoustic emissions 100%
  • Automobile frames 71%
  • Carbon 69%
  • Chassis 51%
  • Fatigue of materials 31%

• FATIGUE RESPONSE OF CARBON/EPOXY LAMINATES UNDER MULTIAXIAL STRESSES FOR DIFFERENT LAY-UP PARAMETERS

  Kalteremidou, K-A., Van Hemelrijck, D. & Pyl, L., 26 jun. 2022, 20th European Conference on Composite Materials. Vassilopoulos, A. P. & Michaud, V. (redactie). EPFL/ESCM, blz. 775-782 8 blz. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

  Onderzoeksoutput: Conference paper

  • lay-up 100%
  • laminates 60%
  • damage 46%
  • carbon 43%
  • shear stress 14%

• FRACTURE OF STRUCTURAL ADHESIVE UNDER PURE MODE III LOADING CONDITIONS: EXPERIMENTAL STUDY AND CHALLENGES

  Shivaie Kojouri, A., Karami, J., Fan, J., Kalteremidou, K-A., Vassilopoulos, A., Van Paepegem, W., Michaud, V. & Van Hemelrijck, D., 26 jun. 2022, 20th European Conference on Composite Materials. EPFL/ESCM, blz. 1-7 7 blz.

  Onderzoeksoutput: Conference paper

  Open Access

  • adhesives 100%
  • acoustic emission 46%
  • wind turbines 39%
  • notches 31%
  • cracks 22%

• INVESTIGATING THE EFFECTS OF DIFFERENT CRACK SHARPENING METHODS ON THE MODE I AND MODE II FRACTURE TESTS OF AN EPOXY RESIN

  Karami, J., Shivaie Kojouri, A., Fan, J., Kalteremidou, K-A., Paepegem, Van, W., Vassilopoulos, A., Michaud, V. & Van Hemelrijck, D., 26 jun. 2022, 20th European Conference on Composite Materials. EPFL/ESCM, blz. 1-8 8 blz.

  Onderzoeksoutput: Conference paper

  Open Access

  • resin 100%
  • crack 89%
  • test 44%
  • effect 26%
  • method 24%

• Pushing the Limits of Acoustic Emission for the Benefit of Performance of Engineering Materials

  Lefever, G., Korda, E., Tsangouri, E., Kalteremidou, K-A., Ospitia, N. & Angelis, D., 8 sep. 2022, International Conference on Regeneration and Conservation of Structures (ICRCS 2022). RILEM, blz. 1-4 4 blz.

  Onderzoeksoutput: Conference paper

  • pushing 100%
  • acoustic emission 86%
  • engineering 59%
  • performance 35%
  • damage 34%

• TEMPERATURE DISTRIBUTION DETERMINATION OF THERMOPLASTIC COMPOSITES SAMPLES IN BIAS EXTENSION TESTS USING A DIGITAL TWIN

  Hossein Abadi, R., Karami, J., Shivaie Kojouri, A., Kalteremidou, K-A. & Van Hemelrijck, D., 26 jun. 2022, 20th European Conference on Composite Materials. Vassilopoulos, A. P. & Michaud, V. (redactie). EPFL/ESCM, blz. 558-564 7 blz. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 4).

  Onderzoeksoutput: Conference paper

  Open Access

  • Digital twin 100%
  • Thermoplastics 68%
  • Temperature distribution 56%
  • Clamping devices 51%
  • Composite materials 39%
  1 Citaat (Scopus)
• 2021

  Failure analysis of CF/epoxy hollow beam components using digital image correlation and acoustic emission analyses

  Kalteremidou, K-A., Murray, B., Carrella-Payan, D., Cernescu, A-V., Van Hemelrijck, D. & Pyl, L., 1 nov. 2021, In: Composite Structures. 275, blz. 1-13 13 blz., 114481.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Acoustic Emission 100%
  • Acoustic emissions 72%
  • Failure analysis 56%
  • Plate Like Crystal 39%
  • Strain 34%
  9 Citaten (Scopus)

  63 Downloads (Pure)

• On the use of acoustic emission to identify the dominant stress/strain component in carbon/epoxy composite materials

  Kalteremidou, K-A., Angelis, D., Van Hemelrijck, D. & Pyl, L., jan. 2021, In: Mechanics Research Communications. 111, blz. 1-8 8 blz., 103663.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Acoustic Emission 100%
  • Acoustic emissions 72%
  • acoustic emission 70%
  • Carbon 50%
  • damage 47%
  21 Citaten (Scopus)

  139 Downloads (Pure)

• The influence of different lay-up parameters on the fatigue response of carbon/epoxy laminates under internal multiaxial stress states

  Kalteremidou, K-A., Van Hemelrijck, D. & Pyl, L., 7 dec. 2021, In: Materials. 14, 24, blz. 1-27 27 blz., 7494.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • lay-up 100%
  • laminates 60%
  • residual stress 60%
  • Laminates 59%
  • Residual stresses 56%
  1 Citaat (Scopus)

  66 Downloads (Pure)
• 2020

  Acoustic emission for identification of the dominant stress component in polymer composites at early loads

  Kalteremidou, K-A., Angelis, D., Van Hemelrijck, D. & Pyl, L., 10 nov. 2020, 1st International Electronic Conference on Applied Sciences. MDPI AG, 1 blz.

  Onderzoeksoutput: Conference paper

• An integrated NDT approach for damage assessment of CFRP composites under complex static and fatigue loads

  Kalteremidou, K-A., 2020, Brussels.

  Onderzoeksoutput: PhD Thesis

  • damage assessment 100%
  • static loads 88%
  • carbon fiber reinforced plastics 83%
  • damage 44%
  • composite materials 38%

• Effect of multiaxiality, stacking sequence and number of off-axis layers on the mechanical response and damage sequence of carbon/epoxy composite laminates under static loading

  Kalteremidou, K-A., Hajikazemi, M., Van Paepegem, W., Van Hemelrijck, D. & Pyl, L., 12 apr. 2020, In: Composites Science and Technology. 190, blz. 1-13 13 blz., 108044.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Laminates 100%
  • Carbon 83%
  • Composite materials 63%
  • Composite Material 54%
  • Carbon Atom 51%
  21 Citaten (Scopus)

  115 Downloads (Pure)

• Failure characterisation of carbon/epoxy sub-components with the aid of Digital Image Correlation and Acoustic Emission

  Kalteremidou, K-A., Murray, B., Carrella-Payan, D., Van Hemelrijck, D. & Pyl, L., 30 sep. 2020, SAMPE Europe 2020. SAMPE Europe, 8 blz.

  Onderzoeksoutput: Conference paper

• Failure characterisation of CF/epoxy V-shape components using digital image correlation and acoustic emission analyses

  Murray, B. R., Kalteremidou, K-A., Carrella-Payan, D., Cernescu, A., Van Hemelrijck, D. & Pyl, L., 15 mrt. 2020, In: Composite Structures. 236, blz. 1-13 13 blz., 111797.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Acoustic Emission 100%
  • Acoustic emissions 72%
  • Time-to-failure 54%
  • Displacement 54%
  • Strain 46%
  11 Citaten (Scopus)

  132 Downloads (Pure)

• Reinforcement effectiveness in composites evaluated by low load acoustic emission

  Kalteremidou, K-A., Tsangouri, E., Pyl, L. & Angelis, D., 10 nov. 2020, 1st International Electronic Conference on Applied Sciences. MDPI AG, 1 blz.

  Onderzoeksoutput: Conference paper
• 2019

  Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests

  Pyl, L., Kalteremidou, K-A. & Van Hemelrijck, D., 8 feb. 2019, In: Composites Science and Technology. 171, blz. 135-151 17 blz.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Reinforced Plastic 100%
  • Stress concentration 70%
  • Tensile Strength 69%
  • Tensile strength 65%
  • Reinforcement 65%
  57 Citaten (Scopus)

  294 Downloads (Pure)
• 2018

  Crack tip monitoring of mode I and mode II delamination in CF /Epoxies under static and dynamic loading conditions using Digital Image Correlation

  Murray, B., Fonteyn, S., Carrella-Payan, D., Kalteremidou, K-A., Cernescu, A-V., Van Hemelrijck, D. & Pyl, L., 1 jul. 2018, 18th International Conference on Experimental Mechanics (ICEM-18). Brussels, Belgium: MDPI AG, blz. 1-7 7 blz. 389

  Onderzoeksoutput: Conference paper

• Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites

  Pyl, L., Kalteremidou, K-A. & Van Hemelrijck, D., okt. 2018, In: Polymer Testing. 71, blz. 318-328 11 blz.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Tensile testing 100%
  • Nylon 94%
  • 3D printers 85%
  • Carbon fibers 81%
  • Fibers 59%
  78 Citaten (Scopus)

  333 Downloads (Pure)

• Multiaxial damage characterization of carbon/epoxy angle-ply laminates under static tension by combining in situ microscopy with acoustic emission

  Kalteremidou, K-A., Murray, B., Tsangouri, E., Angelis, D., Van Hemelrijck, D. & Pyl, L., 23 okt. 2018, In: Applied Sciences. 8, 11, blz. 1-20 20 blz., 2021.

  Onderzoeksoutput: Article › peer review

  Open Access

  Bestand

  • Acoustic Emission 100%
  • Acoustic emissions 72%
  • Microscopic examination 71%
  • acoustic emission 70%
  • Tension 63%
  17 Citaten (Scopus)

  112 Downloads (Pure)

• Multiaxial damage identification of angle-ply laminates using acoustic emission and other online monitoring techniques

  Kalteremidou, K. A., Tsangouri, E., Cernescu, A., Murray, B. R., Pyl, L., Aggelis, D. G. & van Hemelrijck, D., 24 jun. 2018, ECCM 2018 - 18th European Conference on Composite Materials. MDPI AG, blz. 1-8 8 blz. (ECCM 2018 - 18th European Conference on Composite Materials).

  Onderzoeksoutput: Conference paper

  • Acoustic Emission 100%
  • Acoustic emissions 72%
  • Laminates 60%
  • Monitoring 37%
  • Carbon fibers 20%

• Static and fatigue damage characterization of carbon/epoxy angle-ply laminates with the use of Acoustic Emission and online microscopy

  Kalteremidou, K-A., Tsangouri, E., Cernescu, A-V., Murray, B., Pyl, L., Angelis, D. & Van Hemelrijck, D., 1 jul. 2018, 18th International Conference on Experimental Mechanics. MDPI AG, blz. 1-6 6 blz. 392

  Onderzoeksoutput: Conference paper

• The combined use of millimetre wave imaging and acoustic emission for the damage investigation of glass fibre reinforced polymer composites

  Kalteremidou, K-A., Pourkazemi, A., El Idrissi, Y., Morabet, Y., He, G., Stiens, J., Pyl, L. & Van Hemelrijck, D., 10 jun. 2018, 12th European Conference on Non-Destructive Testing. blz. 1-8 8 blz.

  Onderzoeksoutput: Conference paper

• The influence of multiaxiality in angle-ply carbon/epoxy laminates on the Kaiser/Felicity effects under incremental loading

  Kalteremidou, K-A., Tsangouri, E., Murray, B., Pyl, L., Angelis, D. & Van Hemelrijck, D., 5 nov. 2018, 24th International Acoustic Emission Symposium (IAES 24). Japanese Society for Non-Destructive Inspection (JSNDI), blz. 77-82 6 blz.

  Onderzoeksoutput: Conference paper
• 2017

  Experimental investigation of the fatigue behaviour of off-axis CFRP laminates using Non Destructive Techniques

  Kalteremidou, K-A., Fonteyn, S., Carrella-Payan, D., Pyl, L. & Van Hemelrijck, D., 20 aug. 2017, 21st International Conference on Composite Materials. 12 blz.

  Onderzoeksoutput: Conference paper

  • Carbon fiber reinforced plastics 100%
  • Laminates 83%
  • Fatigue of materials 63%
  • Acoustic Emission 46%
  • Composite Material 45%
  1 Citaat (Scopus)
• 2016

  Influence of an open or closed hole on strain concentrations in GFRP specimens aided by DIC - A comparison between UD tape and NCF

  Kalteremidou, K-A., Fonteyn, S., Brouwers, S., Mangialetto, F., Pyl, L. & Van Hemelrijck, D., 3 jul. 2016, 17th International Conference on Experimental Mechanics. 2 blz.

  Onderzoeksoutput: Conference paper

  8 Downloads (Pure)