Development and Validation of V2G Technology for Electric Vehicle Chargers Using Combo CCS Type 2 Connector Standards

Shahid Jaman; Boud Verbrugge; Oscar Hernandez Garcia; Mohamed  Abdel Monem; Blum Oliver; Thomas Geury; Omar Hegazy

doi:10.3390/en15197364

Development and Validation of V2G Technology for Electric Vehicle Chargers Using Combo CCS Type 2 Connector Standards

Shahid Jaman, Boud Verbrugge, Oscar Hernandez Garcia, Mohamed Abdel Monem, Blum Oliver, Thomas Geury, Omar Hegazy

Onderzoeksoutput: Article › peer review

18 Citaten (Scopus)

Samenvatting

Vehicle-to-Grid (V2G) technology is viewed as a viable solution to offer auxiliary power system services. Currently, V2G operation is only possible through DC chargers using the CHAdeMO connector with the necessary communication protocol. However, in Europe, for high-power DC charging (>50 kW), the Combined Charging Service (CCS) Type 2 is preferred over CHAdeMO. Therefore, this work presents the development of a V2G testing system with a Combo CCSType 2 charger including communication via the ISO 15118-2 protocol. The BOSCH passenger car with a 400 V battery pack is used to test and validate the technical feasibility of V2G charging via a Combo CCS Type 2 connector standard. The V2G feature is characterized in terms of efficiency, signal delay, response proportionality, magnitude accuracy and noise precision. A data driven V2G charger simulation model based on the real-time data is also developed in MATLAB/Simulink. The performance under various operating settings is presented in the outcomes, emphasizing the need for appropriate hardware calibration, and understanding while delivering standard-compliant grid control services using V2G technology. Finally, the results of the simulation model are compared with the real hardware results in terms of error, noise level and data magnitude accuracy.

Originele taal-2	English
Artikelnummer	7364
Pagina's (van-tot)	1-24
Aantal pagina's	24
Tijdschrift	Energies
Volume	15
Nummer van het tijdschrift	19
DOI's	https://doi.org/10.3390/en15197364
Status	Published - 7 okt 2022

Bibliografische nota

Funding Information:
This work was supported by the Horizon 2020 Programme of the European Commission under grant agreement no. 875131 (eCharge4Driver project). We, as authors, also acknowledge Flanders Make for the support to our research group.

Funding Information:
This research was funded by European Commission under grant number 875131 (eCharge4Driver project).

Publisher Copyright:
© 2022 by the authors.

Copyright:
Copyright 2022 Elsevier B.V., All rights reserved.

Toegang tot document

10.3390/en15197364

Andere bestanden en links

V2G barriers survey
De Cauwer, C. (Creator) & Goncearuc, A. (Creator), VUB Institutional Data Repository, 31 mrt 2025
Dataset

Citeer dit

@article{dbfbf55e2cf44a34a4b1eb19a3415988,

title = "Development and Validation of V2G Technology for Electric Vehicle Chargers Using Combo CCS Type 2 Connector Standards",

abstract = "Vehicle-to-Grid (V2G) technology is viewed as a viable solution to offer auxiliary power system services. Currently, V2G operation is only possible through DC chargers using the CHAdeMO connector with the necessary communication protocol. However, in Europe, for high-power DC charging (>50 kW), the Combined Charging Service (CCS) Type 2 is preferred over CHAdeMO. Therefore, this work presents the development of a V2G testing system with a Combo CCSType 2 charger including communication via the ISO 15118-2 protocol. The BOSCH passenger car with a 400 V battery pack is used to test and validate the technical feasibility of V2G charging via a Combo CCS Type 2 connector standard. The V2G feature is characterized in terms of efficiency, signal delay, response proportionality, magnitude accuracy and noise precision. A data driven V2G charger simulation model based on the real-time data is also developed in MATLAB/Simulink. The performance under various operating settings is presented in the outcomes, emphasizing the need for appropriate hardware calibration, and understanding while delivering standard-compliant grid control services using V2G technology. Finally, the results of the simulation model are compared with the real hardware results in terms of error, noise level and data magnitude accuracy.",

author = "Shahid Jaman and Boud Verbrugge and {Hernandez Garcia}, Oscar and {Abdel Monem}, Mohamed and Blum Oliver and Thomas Geury and Omar Hegazy",

note = "Funding Information: This work was supported by the Horizon 2020 Programme of the European Commission under grant agreement no. 875131 (eCharge4Driver project). We, as authors, also acknowledge Flanders Make for the support to our research group. Funding Information: This research was funded by European Commission under grant number 875131 (eCharge4Driver project). Publisher Copyright: {\textcopyright} 2022 by the authors. Copyright: Copyright 2022 Elsevier B.V., All rights reserved.",

year = "2022",

month = oct,

day = "7",

doi = "10.3390/en15197364",

language = "English",

volume = "15",

pages = "1--24",

journal = "Energies",

issn = "1996-1073",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "19",

}

TY - JOUR

T1 - Development and Validation of V2G Technology for Electric Vehicle Chargers Using Combo CCS Type 2 Connector Standards

AU - Jaman, Shahid

AU - Verbrugge, Boud

AU - Hernandez Garcia, Oscar

AU - Abdel Monem, Mohamed

AU - Oliver, Blum

AU - Geury, Thomas

AU - Hegazy, Omar

N1 - Funding Information: This work was supported by the Horizon 2020 Programme of the European Commission under grant agreement no. 875131 (eCharge4Driver project). We, as authors, also acknowledge Flanders Make for the support to our research group. Funding Information: This research was funded by European Commission under grant number 875131 (eCharge4Driver project). Publisher Copyright: © 2022 by the authors. Copyright: Copyright 2022 Elsevier B.V., All rights reserved.

PY - 2022/10/7

Y1 - 2022/10/7

N2 - Vehicle-to-Grid (V2G) technology is viewed as a viable solution to offer auxiliary power system services. Currently, V2G operation is only possible through DC chargers using the CHAdeMO connector with the necessary communication protocol. However, in Europe, for high-power DC charging (>50 kW), the Combined Charging Service (CCS) Type 2 is preferred over CHAdeMO. Therefore, this work presents the development of a V2G testing system with a Combo CCSType 2 charger including communication via the ISO 15118-2 protocol. The BOSCH passenger car with a 400 V battery pack is used to test and validate the technical feasibility of V2G charging via a Combo CCS Type 2 connector standard. The V2G feature is characterized in terms of efficiency, signal delay, response proportionality, magnitude accuracy and noise precision. A data driven V2G charger simulation model based on the real-time data is also developed in MATLAB/Simulink. The performance under various operating settings is presented in the outcomes, emphasizing the need for appropriate hardware calibration, and understanding while delivering standard-compliant grid control services using V2G technology. Finally, the results of the simulation model are compared with the real hardware results in terms of error, noise level and data magnitude accuracy.

AB - Vehicle-to-Grid (V2G) technology is viewed as a viable solution to offer auxiliary power system services. Currently, V2G operation is only possible through DC chargers using the CHAdeMO connector with the necessary communication protocol. However, in Europe, for high-power DC charging (>50 kW), the Combined Charging Service (CCS) Type 2 is preferred over CHAdeMO. Therefore, this work presents the development of a V2G testing system with a Combo CCSType 2 charger including communication via the ISO 15118-2 protocol. The BOSCH passenger car with a 400 V battery pack is used to test and validate the technical feasibility of V2G charging via a Combo CCS Type 2 connector standard. The V2G feature is characterized in terms of efficiency, signal delay, response proportionality, magnitude accuracy and noise precision. A data driven V2G charger simulation model based on the real-time data is also developed in MATLAB/Simulink. The performance under various operating settings is presented in the outcomes, emphasizing the need for appropriate hardware calibration, and understanding while delivering standard-compliant grid control services using V2G technology. Finally, the results of the simulation model are compared with the real hardware results in terms of error, noise level and data magnitude accuracy.

UR - https://www.mdpi.com/1996-1073/15/19/7364

UR - http://www.scopus.com/inward/record.url?scp=85139906127&partnerID=8YFLogxK

U2 - 10.3390/en15197364

DO - 10.3390/en15197364

M3 - Article

VL - 15

SP - 1

EP - 24

JO - Energies

JF - Energies

SN - 1996-1073

IS - 19

M1 - 7364

ER -

Development and Validation of V2G Technology for Electric Vehicle Chargers Using Combo CCS Type 2 Connector Standards

Samenvatting

Bibliografische nota

Toegang tot document

Andere bestanden en links

Vingerafdruk

Datasets

V2G barriers survey

Citeer dit